Mold performance also depends on how it is assembled, fitted and finished.
Fundimoldes combines final tooling preparation with functional review and surface inspection, so assembly is never separated from manufacturing and validation decisions.
Types and scope.
Component assembly and checking of fits, shut-offs, guides, inserts and functional elements. Ideal for: New, repaired or modified molds.
Surface preparation from functional finish up to mirror polish when the application requires it. Ideal for: Cavities, cores, inserts and contact surfaces.
Powder coating, polyurethane paint or other finishes defined for the project. Ideal for: Structures, plates and exposed components.
PTFE (Teflon) coating, zinc plating, passivation, chrome plating, sealing or heat treatment, depending on compatibility. Ideal for: Friction control, protection, cleanability or surface performance.
Technical data sheet.
Assembly, fitting, polishing, painting and coatings
Subject to tooling size and assembly bench
Steels, aluminum, coatings and treatments per application
Functional fitting, surface inspection and commissioning
Actual capacity subject to technical validation based on geometry, weight, material, tolerances and process.
How we work.
We identify components, incoming condition, drawings, fits, required finish and acceptance criteria.
We check interfaces, assembly sequence and potential interferences.
We work shut-offs, supports, guides, inserts and contact surfaces within the defined scope.
We carry out polishing, painting, sandblasting and shot blasting, or coordinate coatings and treatments.
We check operation, finish and final condition before delivery.
Technical considerations.
The level of polish or texture should match the processed material, demolding and the expected appearance.
Every coating must be validated against the base material, temperature, chemicals and cleaning conditions.
It is best to identify shut-offs, seals, datum surfaces and areas that must not be painted or coated.
For used tooling, scope may change after teardown and diagnosis.
Why Fundimoldes?
Engineering, patternmaking, casting, machining, assembly, finishing, validation and after-sales support under one operation.
Every proposal is backed by a review of geometry, material, process, equipment and real-world conditions.
Drawings, data sheets, reports and inspections are included according to project scope.
Fundimoldes can manufacture, maintain, repair, modify and reproduce tooling components.
Information for your quote.
Reply within 24 business hours via WhatsApp +57 321 227 8823.
Common questions.
Do you work on molds made by other manufacturers?
Yes, subject to inspection, diagnosis and scope definition.
What finishes do you offer?
Assembly and fitting, polishing, mirror polish, powder coating, polyurethane paint, PTFE (Teflon) coating, shot blasting, sandblasting and the coatings specified for each project.
Does the service include a machine trial?
A trial depends on the mold type, equipment availability and commercial scope. It must be defined during the technical assessment.
How is the right finish determined?
Based on the application, processed material, geometry, demolding, appearance and operating conditions.
Stages before and after assembly.
Tooling assembled, fitted and validated in-house.
Components reaching assembly at final size.
Fabrication and recovery of metal components.
Dimensional verification of the assembly.
Reassembly and set-up of molds in production.
Describe the tool or component and the required finish.
We deliver molds ready to run
Share drawings, a 3D model, photos, dimensions, material, quantity and operating conditions. Our technical team will validate the manufacturing route and scope.