Turn physical geometry into usable technical data.
3D scanning provides an objective basis for reverse engineering, dimensional inspection and documentation. The deliverable is defined by the decision you need to make.
Types and scope.
Surface geometry capture to generate a digital mesh. Ideal for: Documentation, technical archives and an engineering baseline.
Using the scan as input to rebuild surfaces, solids and functional drawings. Ideal for: Spare parts without drawings and obsolete components.
Alignment of the measurement to the nominal model and visualization of deviations. Ideal for: Quality control, adjustments and dimensional acceptance.
Comparison of used, distorted or repaired parts against an available reference. Ideal for: Maintenance, diagnosis and repair decisions.
Technical data sheet.
3D digitization, reverse engineering and dimensional inspection
To be validated based on geometry, weight, material and process.
Metal and plastic parts, tooling and existing molds
CAD comparison, color map and dimensional report
Actual capacity subject to technical validation based on geometry, weight, material, tolerances and process.
How we work.
We agree whether the project aims to digitize, reproduce, compare, inspect or document.
We review access, surface, stability, reference targets and capture conditions.
We digitize the geometry with a HandySCAN 3D Silver within the recommended range.
We clean the mesh, organize the data and align it to CAD or agreed references.
We supply the mesh, agreed CAD formats or a comparison report, according to scope.
Technical considerations.
HandySCAN 3D Silver, with a rated accuracy of 0.040 mm and a rated mesh resolution of 0.200 mm.
The recommended range is 0.05 m to 4 m; actual feasibility depends on geometry, access and surface finish.
We deliver CAD, STL, IGES and STEP as possible outputs, depending on processing scope.
A deviation map must be analyzed with defined alignment, tolerances and functional references.
Why Fundimoldes?
Engineering, patternmaking, casting, machining, assembly, finishing, validation and after-sales support under one operation.
Every proposal is backed by a review of geometry, material, process, equipment and real-world conditions.
Drawings, data sheets, reports and inspections are included according to project scope.
Fundimoldes can manufacture, maintain, repair, modify and reproduce tooling components.
Information for your quote.
Reply within 24 business hours via WhatsApp +57 321 227 8823.
Common questions.
Does scanning automatically produce an editable CAD file?
Not necessarily. Scanning produces measurement data and a mesh; converting them into CAD surfaces or solids is part of a reverse engineering scope.
Can you scan large molds?
The published recommended range is 0.05 m to 4 m, subject to access, geometry, surface and capture strategy.
What does a dimensional report include?
CAD comparison, color-map deviation visualization and the agreed results for the areas or dimensions evaluated.
What do you need for a quote?
Measurement goal, dimensions, material, photos, location, nominal CAD if available and acceptance criteria.
What 3D scanning and metrology are used for.
From physical sample to a manufactured, verified spare.
Rebuilding the model from the scanned mesh.
Objective wear measurement against the original condition.
Machined parts verified against CAD.
Inspection of castings before machining.
Tell us the part, its approximate size and what you need measured.
Digitize, measure and reproduce parts accurately
Share drawings, a 3D model, photos, dimensions, material, quantity and operating conditions. Our technical team will validate the manufacturing route and scope.