Design and manufacturing tied to the actual injection process.
The mold is developed from the part, the polymer, the machine and the expected volume. Fundimoldes integrates engineering, machining, assembly, finishing, validation and after-sales support.
Need to make a plastic part: is an injection mold what you need?
An injection mold is a steel or aluminum tool mounted on an injection molding machine. Molten plastic is forced into the cavity, cools and comes out as a finished part, cycle after cycle.
When the part is solid or has defined walls and is needed in volume with repeatable dimensions. For very few units, consider CNC machining or 3D printing first.
Bottles and containers are made with blow molds; tanks and large hollow parts with rotational molds; trays, blisters and sheet packaging with thermoforming molds.
Fundimoldes designs and builds the mold, its components and spare parts. The plastic parts are then produced with that mold on an injection machine, usually at the customer’s plant or their molder’s. Not sure? See which process your plastic part needs.
Types and scope.
Base architecture for forming the outer and inner geometry of the part. Ideal for: Thermoplastic parts whose geometry and volume are subject to evaluation.
Inserts for critical areas, maintenance or variants, where the design allows. Ideal for: Part families, repair and localized wear control.
Feed system engineered for the part, material, cycle and equipment. Ideal for: Control of filling, scrap and repeatability.
Channels and circuits designed for thermal control within geometric constraints. Ideal for: Reducing variation and controlling cycle time.
Ejection elements defined by geometry, shrinkage and demolding. Ideal for: Parts that require controlled extraction.
Technical data sheet.
Thermoplastic injection; cavity and core mold
To be validated based on geometry, shot weight and machine capacity
P20, H13, 1.2311, aluminum or others as required
3D scanning, dimensional inspection and machine trials
Actual capacity subject to technical validation based on geometry, weight, material, tolerances and process.
How we work.
We review CAD, material, weight, shrinkage, machine capacity, volume, appearance and tolerances.
We define cavity, core, parting, feed, cooling, ejection, inserts and structure.
We machine plates, cavities, cores, inserts and auxiliary components.
We assemble and check shut-offs, movements, cooling and ejection.
We apply dimensional control, 3D scanning and machine trials when they are part of the scope.
We deliver the agreed documentation and support for maintenance, spare parts or modifications.
Technical considerations.
We work with P20, H13, 1.2311, aluminum or others as required; selection depends on volume, resin, finish and maintenance.
They must be defined for the actual material and process conditions; generic values are not assumed.
Channel geometry must balance heat transfer, strength, access and maintenance.
Requires compatible, available equipment; acceptance criteria must be agreed in advance.
Why Fundimoldes?
Engineering, patternmaking, casting, machining, assembly, finishing, validation and after-sales support under one operation.
Every proposal is backed by a review of geometry, material, process, equipment and real-world conditions.
Drawings, data sheets, reports and inspections are included according to project scope.
Fundimoldes can manufacture, maintain, repair, modify and reproduce tooling components.
Information for your quote.
Reply within 24 business hours via WhatsApp +57 321 227 8823.
Common questions.
What information is needed to quote an injection mold?
Part CAD or drawing, material, weight, dimensions, annual volume, machine, expected feed system, finish, tolerances and a sample if available.
Do you make complete molds or only components?
Both: complete molds, cavities, cores, inserts, plates, spare parts and maintenance.
Can you adapt the mold to a specific machine?
Yes. Compatibility must be validated with data on the machine, platens, clamping, injection and connections.
Do you include documentation?
We offer technical documentation, dimensional validation and after-sales maintenance according to scope.
Does Fundimoldes make the plastic parts or the mold?
Fundimoldes designs and builds the mold. Parts are produced with that mold on an injection machine. If you haven’t decided who will mold the parts, say so when requesting a quote.
Services for your injection mold.
3D CAD of cavity, core, feeding and cooling.
Milling, turning and EDM of cavities, inserts and plates.
Diagnosis, overhaul, modifications and spares for molds in production.
To design the mold when only a physical part exists.
If your part is a bottle, container or hollow part.
Share the part, material and expected volume to quote your mold.
Request a quote for your plastic injection mold
Share drawings, a 3D model, photos, dimensions, material, quantity and operating conditions. Our technical team will validate the manufacturing route and scope.