Casting and machining engineering around a circuit that must remain leak-tight.
The path, tube material, bend radii, wall thickness, connections, fluid, pressure, and temperature must be defined before manufacturing the plate or mold.
Types and scope.
Cast or machined plates with a defined internal circuit. Ideal for: Heating or cooling industrial surfaces.
Tooling with a fluid path built into the structure. Ideal for: Molding processes that require thermal control.
Coil integrated during casting. Ideal for: Special geometries and internal heat distribution.
Circuits created by machining and closed with defined components. Ideal for: Applications where the architecture cannot be achieved by casting.
Technical data sheet.
Casting with embedded cooling coil; integrated thermal system
To be validated based on geometry, wall thickness, and coil path
Cast or machined aluminum; copper or steel coil
Continuity, leak testing, and dimensional inspection
Actual capacity subject to technical validation based on geometry, weight, material, tolerances and process.
How we work.
We review function, fluid, temperature, pressure, flow rate, connections, and target zones.
We define routing, spacing, bend radii, cover thickness, inlet, outlet, and integration method.
We form or prepare the circuit in copper, steel, or another validated option.
We embed the coil in cast aluminum or in the agreed machined architecture.
We produce surfaces, holes, interfaces, and functional datums.
We perform continuity checks, leak testing, and dimensional inspection according to agreed parameters.
Technical considerations.
They must be stated explicitly to define material, thickness, connections, and testing.
Tight bends, welds, and transitions can increase risk and must be avoided or validated.
The thickness around the tube must balance integrity, heat transfer, and subsequent machining.
The method, pressure, medium, duration, and acceptance criteria must be stated in the work order.
Why Fundimoldes?
Engineering, patternmaking, casting, machining, assembly, finishing, validation and after-sales support under one operation.
Every proposal is backed by a review of geometry, material, process, equipment and real-world conditions.
Drawings, data sheets, reports and inspections are included according to project scope.
Fundimoldes can manufacture, maintain, repair, modify and reproduce tooling components.
Information for your quote.
Reply within 24 business hours via WhatsApp +57 321 227 8823.
Common questions.
Can the coil be copper or steel?
We work with both materials, subject to compatibility with the fluid, temperature, pressure, and integration process.
Can you make just the plate?
Yes, the scope can be a thermal plate, a mold, or a special component.
How do you verify there are no leaks?
Through an agreed continuity and leak test; parameters must be defined before manufacturing.
Can you repair an embedded cooling coil?
Access, damage location, material, contamination, and the feasibility of rebuilding without compromising the part must be evaluated.
Services for plates with embedded coils.
Plates cast in our own plant.
Coil layout based on the thermal load.
Machining of functional surfaces and connections.
Molds that integrate coil-based thermal control.
Diagnosis of leaks and loss of thermal performance.
Send a drawing, dimensions and thermal operating conditions.
We design your plate with an embedded cooling coil
Share drawings, a 3D model, photos, dimensions, material, quantity and operating conditions. Our technical team will validate the manufacturing route and scope.