Process finder
Which manufacturing process does my part need?
Answer five questions and we’ll point you to the process worth evaluating and the type of mold or service that fits. It is an initial orientation; it does not replace an engineering review.
Quick guide
How to choose the manufacturing process for a part.
Three questions almost always decide the process: the shape of the part, its material and how many units you need per year. A hollow part with a neck is blow molded; a large tank, rotationally molded; a solid part in the thousands, injection molded. The table gives the general direction; every case is confirmed by an engineering review.
| Process | Typical parts | Shape | Usual volume |
|---|---|---|---|
| Plastic injection | Caps, housings, technical parts | Solid, uniform walls | Thousands or more |
| Blow molding | Bottles, containers, hollow parts | Hollow, with a neck | Thousands or more |
| Rotational molding | Tanks, containers | Hollow and large | Hundreds to thousands |
| Thermoforming | Trays, blisters, inserts | Open, thin sheet | Hundreds to thousands |
| EPS injection | Foam packaging and protection | Lightweight volume | Thousands or more |
| Aluminum casting | Metal parts, housings, cavities | Complex, in metal | From a single unit |
| CNC machining | Spares, precision parts | Any, no mold needed | One to a few units |
If the part already exists but has no drawings, the first step is to 3D scan it. Once you have a sense of the process, send us your information for a quote and an engineer will confirm the route.