Nine in-house capabilities under one roof.
From engineering and design to maintenance and overhaul. Every critical process runs within the same operation, without relying on third parties.
From technical requirement to delivered part.
3D CAD, reverse engineering and production-ready technical documentation.
See capability → 02 / 09Patterns, match plates and auxiliary tooling for casting processes.
See capability → 03 / 09Non-ferrous alloys for industrial components and mold parts.
See capability → 04 / 09Cavities, inserts, plates and special parts for industrial applications.
See capability → 05 / 09Assembly, surface finishing and final tooling preparation.
See capability → 06 / 09Fabrication, repair and rebuilding of critical metal components.
See capability → 07 / 09Functional prototypes and geometry validation models.
See capability → 08 / 09Part digitizing, reverse engineering and comparison against CAD.
See capability → 09 / 09We support the full tooling life cycle.
See capability →Industrial manufacturing services in Colombia, one by one.
Fundimoldes has built molds and industrial parts in Bogotá, Colombia since 1972, with ISO 9001:2015 certified quality. These are the nine capabilities of the plant and what each one is used for.
Engineering and design
We model the part and the tooling in 3D CAD from a drawing, a model or a physical sample. It is the starting point for a new mold, a spare without drawings or an engineering change.
Casting patternmaking
We make patterns, match plates and auxiliary tooling for sand casting. In-house patternmaking lets us control shrinkage, draft angles and machining allowances from the start.
Aluminum casting
We cast aluminum alloys in green sand, gas-cured sand and permanent molds, in four furnaces with up to one metric ton per pour. Our heaviest casting so far is a 450 kg cavity with an embedded cooling coil.
CNC machining
Milling, turning and EDM for cavities, inserts, plates and special parts. Our machining centers are geared to large-format parts, a difference from shops with small equipment.
Assembly, fitting and finishing
We assemble, fit and finish the mold or tooling before delivery, with a functional check of parting lines, moving parts and circuits.
Industrial welding
TIG and MIG welding to fabricate, repair and rebuild metal parts, structures and worn molds.
Prototyping and 3D printing
FDM and SLA printing for prototypes, casting patterns and fixtures, linked to the foundry and CNC shop in the same plant.
3D scanning and dimensional inspection
We digitize parts from 0.05 m to 4 m for reverse engineering, inspection against CAD and wear diagnosis.
Mold maintenance and overhaul
Diagnosis, repair, engineering changes and overhaul of molds, including those built by other mold makers.
Capabilities are combined per project. A spare part without drawings, for example, goes through 3D scanning, reverse engineering, patternmaking, casting, machining and finishing without leaving the plant. Request a quote or see our mold lines.